5pcs 1.6W 1600mW Blue 445nm Laser Diode TO-18 5.6mm

Description

LD removed from NEW modules with Tin-Pin.
This laser diode emit high intensity visible light which can be hazardous to the human eye. Only for Professionals !
Manufacture: Nichia co. Japan
Color output Typ.: Blue - 445nm
Continuous optical output power: 1.6W - 1.7W (All Tested)
Operating current Typ.: 1.4A
Operating voltage Typ.: 4.4 - 4.8V
Efficiency min.: 1.2 W/A
Beam Divergence A II approx: 15°
Beam Divergence A -I approx: 40°
Small package TO-18: 5.6mm diameter
Live Time aprox.: 20 000 h
Without a cooling system: overheat and destroy to 5S after power on.
Temperature on socket over 60 degree celsius is detrimental for the diode.
This laser diode needs Driver - Not included
All LD tested before shipped.
Attention: The following practices should be followed to minimize damage to static sensitive devices.
1. Discharge personal static before handling devices. Use grounding wrist strap.
2. After removed from anti static packing. Handle laser diode by the body.
3. Do not slide laser diode over any surface.
4. Only grounded tip soldering irons should be used.
5. Connect to ground Soldering Wire with Rosin Core.
6. Shorted both pins after finished.
7. Remove Short after connect to driver.
8. Use quality Constant Current Driver for this LD - accurate Current and Voltage.
9. Direct connect to Standard Power Supply will damage the LD.
Delivery: Airmail from EU + Tracking information