Gigahertz Solutions HF35C RF Microwave Radio Frequency Meter + DG-20 Attenuator

Description

PURCHASE WITH A PURPOSE!
Please know that your purchase greatly assists SourcePoint Global Outreach,
a
501(c)(3) nonprofit organization.We provide teachings of compassion and
nonviolence to men and women in prison throughout
the United
States, as well as solar powered flashlights to villages
without electricity in developing countries.
PLEASE NOTE!
Be sure you are choosing the correct meter and have
done your research. Absolutely no returns will be
authorized or accepted once you open the package
and use the meter! If you receive the package, DO NOT
OPEN IT, but change your mind, we will honor a return.
People do not know how to use these meters, then think
they are 'defective' because of their lack of education. This
is time consuming and costs us money. Or they want to
use the meter and return it like people do on Amazon.
Absolutely no returns will be accepted if you open the box
after receiving the meter. Be sure you are choosing the
meter you want.
Gigahertz Solutions HF35C RF - Microwave Meter
with the DG-20 Attenuator
(Attenuator Increases Signal Strength and Measuring Range of Meter)
Brand New In Box - Full Manufacturer Warranty
State of the art RF/MW meter/analyzer for measuring
radiation from smart meters, cell phones, cell towers, WiFi,
Bluetooth, microwave ovens, cordless phones, wireless internet
routers and modems, air traffic control, radar and more.
100% Positive Feedback Seller
HONEST - RESPECTFUL - NO HASSLES!
Ships from Canada within 1 day
4 - 7 Business Days Delivery
The Gigahertz Solutions HF35C RF-Analyzer (also known as the eHF35C, eHF 35C or HF 35C) is the gold standard in measuring radiation from smart meters, cell phones, WiFi, Bluetooth, microwave towers, air traffic control, and more.  Easy to use, this meter is fantastic for measuring exposure and seeing the effects of remediation (such as RF shielding).  Are you looking to reduce exposure in your home?  It's hard to shield using conductive cloth or other materials unless you can measure your before and after results with an accurate RF meter.
Other meters really only act as microwave detectors. This meter actually accurately measures the strength of the field in microwatts per square meter (µW/m²). The HF35C is Made in Germany by Gigahertz Solutions.
From the manufacturer:
This is THE device for technical amateurs - especially easy to operate. It supports all above mentioned "common advantages" and it allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Has the same features and configuration as the HF32D, however additionally offers
Audio analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency.
Display of peak value as well as average value (switchable).
Sensitivity increased by a factor of 10 (from a minimum display resolution of 0.1µW/m² to a maximum of 1999 µW/m²).
HINT: Our best-selling meter for the easy evaluation!
Frequency Range:
800 MHz - 2.5 GHz
Measurement Range:
Power flux density: 0.1 - 1999 µW/m²
Accuracy:
Basic accuracy including linearity tolerance : +/- 6dB
Zero offset and rollover +/- 9 digits
Sensor:
Logarithmic periodic antenna
Audio Analysis:
Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency
Electric power supply:
9 Volt alkaline manganese battery (included), average operation time 6 - 7 hours
Low-Batt. indication, auto-power-off
Signal Rating:
Display of peak value as well as average value (switchable)
Further Questions:
2 years manufacturer warranty & long-time ex gratia agreement
Weight:
0,49 kg
DG-20 Attenuator: Increase the signal strength and measuring range of your RF Meter with the
DG20
Attenuator
(100x High Frequency Signal Reducer)
If your RF Meter measurement range is set to maximum and the display indicates ("1...") this attenuator will allow the
HF-Analyzer
to accurately
display
higher signal strength measurements
and
extend
the
range
of your RF Meter.
Adding
the
DG20
to your RF measurement arsenal will:
Extend the measuring range of the RF Meters
Allows for 20dB or 100x
higher field strength measurements
in the
frequency range
of
10 MHz
–
3 GHz
How it Works:
1)
Attach the DG20 attenuator to a compatible RF Analyzer (
RF Analyser
)
2)
Attach the LogPer directional antenna to the DG20
3)
Power on the RF Analyzers (
RF Analysers
)  and configure appropriately
4)
Hold the RF Analyzer with an outstretched arm
5)
The analyzer will display the intensity of
RF radiation
on its
LCD
display
6)
Simply multiply the measured value by 100 to obtain the actual value
Compatible with:
HF32D, HF35C and the HF38B
Includes:
Measurement device
Attachable log.-per. antenna incl. cable
Alkaline manganese battery
Detailed instructions manual with factual background information
International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s
responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to making
an offer or purchasing. These charges are normally collected by the delivering freight (shipping) company or when you pick the
item up, do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark
items as ‘gifts’ - US and international government regulations prohibit such behavior.
.