Hantek -650 AC/ Current Clamp Meter 20mA to 650A 400Hz Bandwidth A6L3

Description

It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. When measuring AC/ Current with the Current Clamp, a multimeter or scope can directly measure the current up to 650A, with a frequency uo to 400Hz. In this method, there is no need to break a circuit or to affect the isolation to measure the current.
Features:
AC/ frequency : up to 400Hz.
Effective measurement : 20mA to 650A .
Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Its current transducer is composed by permalloy and hall , which linearly transform the AC or current to AC or current voltage.
If connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
Application:
circuit measurement and malfunction analysis;
Motor drive of frequency converter (or other electronics) measurement;
electronics equipment measurement.
Specifications:
Efficient Measure :
1mV/100mA: 100mA to 20A, Multimeter is set to or rms AC 200mV
1mV/1A: 1A to 200A, Multimeter is set to or rms AC 200mV; 200A to 650A, or rms AC 2V
Current Accuracy: 0 to 650A, +/- (3% reading + 2A )
AC Current Accuracy: 50Hz arrive at 400Hz
Captured Conductor Size: Max. 30mm
Low Indicator: Red
Operating Temperature: 0°C to 50°C 70% RH
Storage Temperature: -20°C to +70°C, 80% RH
Type: 1 * 9V 6F22 (NOT Included)
Output: BNC Plug
: 175 * 70 * 33mm / 6.9 * 2.75 * 1.3in
Weight: 235g / 8.31oz
Package Size: 21.5 * 11 * 5cm / 8. * 4.33 * 1.97in
Package Weight: 303g / 10.71oz
Package List: E0904
1 * Current Clamp with BNC Plug
1 * User Manual (English)