Ideal 125 Grooving Tool Kit with 2 Heads & Blades, Tire Groover

Description

This 250 watt pistol grip grooving iron works well as a heated siper also, Comes with number 4 and number 8 head/blades, Works great as a heated siper when you turn the blades upside down, Made in the U.S.A., 110 volt powered makes this simple to plug in at the garage or use with a small generator at the track
Ideal 125 Grooving Tool Kit with 2 Heads & Blades, Tire Groover
Sku # 9108728
Mfr. Part # 9108728
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Info
250-watt heating element creates strong, consistent heat
110-volt operation for use with fixed power or trackside generating equipment
7-foot-long fixed power cord for work accessibility
Perfect for grooving and siping tires used in dirt motorsports
Pistol grip design aids in cutting stability with or without heat
Includes #4 and #8 tool head and blades, other sizes available
Accepts all Speedway Motors and Ideal brand tool heads and blades
can be used to cut six sipes at once
Depth of sipe adjustable by loosening blade screw and setting to desired depth
Grooving blades can be turned upside down to sipe the tire
Maximize Your Tire’s Traction by Adding Grooves and Sipes
If you race on dirt you know that track conditions change throughout race day and many will ask how to increase traction on tires. From a high grip surface that can be wet and slinging mud to a shiny black or even hard and dusty surface as the laps pile up and the sun goes down, tire traction can change dramatically. While there are different tire compounds you can choose from to aid in traction depending upon the track’s bite, one thing many experienced racers do is modify their dirt tires by adding grooves and sipes to the tread blocks using a heated tire grooving iron tool with a specific cutting head and blade attachment.
What is tire siping and grooving? Well, grooving is just that, cutting grooves in the tread where you are removing rubber, while siping is where you make a thin cut (like a razor blade) but no material is actually removed. These cuts can be made in various widths and directions to enhance traction and get the tire up to temperature faster but can also be used to increase a tire’s longevity by helping it run cooler too. It is all in how the tire is cut.
Learning how to cut a tire with a tire groover and sipe your own tires is a bit of a black art, but a good racer will keep a logbook of modifications and can reflect on past track conditions to see what size groove and angle worked best previously. The same goes for tire siping. Often you can lean on a fellow racer for grooving and DIY tire siping advice or reach out to the tire manufacturer for suggestions on how its tire products react to certain grooving and siping cuts. Regrooving tires that have been sanded down and brought back to life is one way to save some money in your race budget too versus buying new rubber for your race car.
Built Tough to Handle Any Tire
Grooving tires and siping tires on your dirt racer takes some effort, but the Ideal heated Knives 125 tire groover tool is built to take it. Ideal starts off with a robust heating element that outputs a consistent heat and housed it in a tough steel shell with chrome-plated steel tip.
The fiberglass-reinforced polymer handle keeps your hands safe from the extreme heat found at the head of the cutting tool. Ideal then added a fully grounded UL-listed power cord that is a generous 7-feet in length.
This tire cutting tool is designed to work with all Ideal Heated Knives and Speedway Motors brand tire grooving iron heads and blades that we carry. This kit includes #4 and #8 heads and matching #4 and #8 blades. Additional head and blade sizes are available. Additionally, using our optional multi-blade siper head instantly turns the Ideal tire groover into a tire siping tool that makes quick work of your tread blocks.
Grooving and Siping Your Tires Could not be Easier
We carry a full lineup of cutting and (the heads and blades must match in size and used together) for the Ideal tire grooving iron. You will install the appropriate size head into the tool first, followed by the matching cutting blade. Set the depth of your blade before plugging the iron in and it gets hot. Generally, you will want your sipes to be 1/8-inch to 3/16-inch in depth and no more than 1/2 the depth of the tread block.
Most racers will find having more sipes on the front tires and less on the rear is the best combination. Sipe spacing is also determined by the size cutting blades used, with the further apart the sipes the cooler the tire will run. When cutting your grooves, you want them to be at full depth. Width of the grooves and direction will vary depending upon track conditions and whether you are grooving a front or rear tire (rear tires are usually grooved straight across and front tires are grooved at a slight angle to improve forward bite and warm the tire more quickly).
Make the Move and Start Improving Your Tire’s Traction Today
While grooving your tires takes some trial and error and an ability to read a track surface, in the end, grooving and tire siping dirt track racing tires with additional grooves and sipes is just another tool in a racer’s toolbox of tricks and tips to help them get to the front of the pack and stay there until the checkered flag drops. It does not matter if you are racing a Late Model or Sprint Car, doing some competitive rock crawling, rally racing, or even mud drags, modifying your tires with the Ideal tire grooving iron kit is sure to benefit your racing program by providing the ideal tire, making your tires grip the surface better and put just the right amount of heat into them.
Application
This Part Fits
Sanctioning bodies that allow tire grooving/siping (in specific classes) include IMCA, Wissota, USRA, USMTS, UMP
Installation Tips
Install the head and set the blade to the depth of cut needed before plugging in the groover
Plug the groover in and allow it to warm up for five minutes before you start grooving; our tabletop tire grooving is suggested for warm up and cool down
Always store tool facing up/handle down in a vertical position while in use to minimize temperature transfer to the handle
Monitor the temperature of the tool and unplug it as needed to regulate the temperature
This grooving iron will reach operating temperature quickly due to the extreme heat created and will groove before reaching its max temperature
Tire Grooving Tips
Sanding the mold nubs off the tread before grooving or siping is suggested if the nubs are large; a with a 60-grit sanding pad works well for this
Most tires are easier to groove or sipe with the tire mounted and inflated to normal pressures; this is especially true with thin wall racing tires
Complex tread designs can be marked out with a tire marking or
Circle Track specific Grooving and Siping Tips
Tire Grooving
Grooves around the circumference of the tire will add side bite and help cool the tire
Grooves across the tread will add forward bite and help warm up the tire
Rear tire grooves and sipes across the tread typically work best when straight across the tread (90 degrees to the circumferential grooves)
Front tire grooves and sipes across the tread typically work better at a slight angle and when viewed from the top of the right front tire the grooves will angle from right front to left rear
Tire Siping
Sipes have a similar effect as grooves and are primarily used to warm up the tire
Sipes around the circumference do not provide much if any cooling effect since they are not open for air to flow through like grooves are
1/8-inch to 3/16-inch sipe depth works well for most tires.
Adding more sipes which are closer together will increase the tire temperature and will add grip as long as the tire is not overheated
If a tire is overheated and blisters the sipes need to be spaced further apart and possibly a shallower depth of cut should be used
More sipes are typically used on front tires to help them heat up and less sipes on rear tires, especially the right rear
Different size and sold separately in addition to the complete head/blade/siper .
Also available is our which includes this grooving iron and an assortment of heads, blades, and siper as kit.
Made in the U.S.A.
Includes:
(1) #4 head
(1) #8 head
(24) #4 blades
(24) #8 blades
Specs
Sold in Quantity
Kit
Wattage
250
Voltage
110
Notes
MFG. Part #
9108728
Reviews
Product works as it should
Rated
by Rocket Ron on August 30, 2021
Summary:
Grooves tires well
Yes, I recommend this product.
works great
Rated
by RSX850 on June 14, 2021
Summary:
use to regroove maxxis bighorn tire lugs on side-by-side. Price of kit cost less than price of 1 new tire. Now good for another 1,500 miles of trail riding.
Yes, I recommend this product.
Related Items / Suggested Parts
Complete Tire Grooving & Siping Tool Kit, Fit Ideal Groover Siper
Ideal 125 Tire Groover Mega Kit, Heads, Blades, Multi Siper Tool
Multi Blade Tire Siper Head, Fits Ideal Grooving Tool Siping Tool
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.